Cut the Noise—Not Just the Pavement
Asphalt repair doesn’t have to be loud, messy, or expensive. If you’re still wrestling with gear that’s clunky, slow, or breaks more often than it works, there’s a better way. And we’ve got it. At Rock Hard Solutions, we don’t do hype—we do results. That’s why we distribute KEMROC’s EX patch planers.
They’re built tough, cut clean, and make your pavement repair jobs faster, smoother, and more profitable. Whether you’re fixing potholes or cleaning up after a utility install, these tools are made for contractors who are tired of wasting time and budget on outdated methods.
Let’s dig into why KEMROC’s planers are worth a hard look.
The Problem with “The Way It’s Always Been Done”
Traditional pavement repair is slow, messy, and expensive. You know the drill—break up the slab, load up the spoil, haul it off, bring in new material, and hope your gear holds together long enough to finish the job.
But here’s the thing:
- You end up with oversized chunks that are expensive to dump
- You burn time (and money) hauling off spoil and trucking in fill
- Breakers beat up your machines and chew through maintenance budgets
If you’ve ever watched a breaker opened up on a shop floor, you know exactly what that repair bill looks like.
Meet the KEMROC EX Planers—Smarter Tools for Tough Jobs
KEMROC’s EX series patch planers were built to fix those headaches. Designed for precision milling of asphalt and concrete, they cut exactly what you need—no more, no less. That means less damage to surrounding pavement, less rework, and better results for your crew and your client.
Patch Planers Are Built for Control
You can dial in the exact depth you want—whether you’re prepping a pothole or milling down a slab. That precision makes for cleaner patches and stronger overlays.
Patch Planers Reduce Waste, Reuse Spoil
The spoil these planers create? It’s not a pile of jagged, oversized waste. It’s fine, granular material—often clean enough to reuse as backfill. That cuts down on disposal fees and your need to buy and transport new aggregate.
As we’ve seen across Rock Hard jobsites, backfill reuse isn’t just possible—it’s profitable.
Patch Planers Have Faster Turnaround & Fewer Headaches
The planers cut fast and clean. That means less time spent milling, fewer delays between phases, and more jobs completed per week. Translation? Better use of your crew, your machines, and your budget.
What Makes the KEMROC EX-Series Stand Out
KEMROC’s engineering speaks for itself. These planers aren’t modified demolition tools—they’re purpose-built for surface removal jobs like asphalt patching, screed milling, and contaminated concrete cleanup.
- Precision cutting heads for controlled, consistent removal
- Adjustable cutting depths to match your job spec
- Durable picks and drums that are built to take a beating
- Available in multiple sizes to match your existing carrier
- Backed by real support from the Rock Hard Solutions team—folks who’ve actually run equipment in the field
Whether you’re running a compact excavator or a heavier carrier, we’ll help you spec the right model for your jobs.
Real Jobs, Real Payoff
Here’s where the rubber meets the road.
Clean Pothole Cuts
Forget sloppy patch edges. These planers mill tight, defined cuts that actually hold up. Less rework, longer life.
Utility Trench Cleanup
Need to expose or cut along buried lines? KEMROC planers let you remove surface layers with precision—no collateral damage.
Overlay Prep
Planning to lay new asphalt over old? You need a clean, level base. These planers cut surface defects out without over-excavating, leaving you with a strong, bondable surface.
Contaminated Concrete Removal
When your project calls for taking off the top layer—whether it’s for environmental reasons or just poor-quality concrete—the EX 45HD and other models in the series let you mill clean without disturbing the structural base.
The ROI Isn’t Just on Paper
KEMROC patch planers earn their keep—and then some.
- ✅ Lower labor costs thanks to faster production
- ✅ Less fuel and maintenance because you’re not beating up your carrier
- ✅ Reduced tipping fees from finer, reusable spoil
- ✅ Lower material costs when you don’t need to truck in backfill
- ✅ Sharper bids because your jobs are leaner and meaner
Over time, this adds up to higher margins and better control over your job schedules. And because Rock Hard Solutions isn’t just selling tools—we’re your guide through setup, spec, and support—you get more than a machine. You get a partner who actually gives a damn about helping your crew win.
Stop Fighting the Pavement. Start Milling Smarter.
Tired of patch jobs that take too long, cost too much, and look worse than they should?
Let’s fix that.
KEMROC patch planers, distributed by Rock Hard Solutions, offer clean cuts, faster turnaround, reusable material, and less downtime. They’re built for crews who take pride in their work and care about the bottom line.
Book a call with our team today. We’ll help you find the right planer for your setup and walk you through exactly what to expect.
📍 Visit: rockhardsolutions.net
📞 Call: (502) 305-8480
We’ll help you stop patching problems—and start planning solutions.
